Product Information:
A cosmetic finish, based on a two-component polyurethane resin with high volume solids, could be applied at higher film thickness. It has good abrasion, solvent, chemical resistances whilst retaining color and gloss.
Recommended Purpose
As a decorative finish for above water and out side uses, to the marine and heavy industry.
Physical Properties
Color: Please refer to Kylin marine color card.
Sheen: gloss
Volume Solids (%): 57 + 3 (due to wide range of shades)
Theoretical Coverage: 14.25 m2 / lt at 40 microns dry / 70 microns wet
Recommended Film Thickness: 40 microns dry
Flash Point: Mixed product >27oC
VOC: 387.00g/lt (material as into the container)
Drying and Overcoating Conditions
|
Temperature of basis material
|
5oC
|
23oC
|
30oC
|
|
Dry touch
|
4 hours
|
1 hours
|
0.5 hours
|
|
Dry Hard
|
30 hours
|
8 hours
|
4 hours
|
|
Repainting interval (Min)
|
18 hours
|
5 hours
|
2.5 hours
|
|
Repainting interval (Max)
|
21 days
|
Pack Size: Basis 20lt drum, agent 5lt drum. If other packing specifications are needed, please consult with our Kylin Company.
|
