Product Information: A solvent type thinner
Recommended Purpose: Adapted to dilute polyurethane paint. It can also be used as tool cleaner. It is not suitable for paints made of other raw materials
Physical Properties
Flash Point: 28oC
Storage: 12 months at 25oC. To be stored at dry and ventilated circumstance, isolated from fire and far from heat source and kept away from direct sunlight. The package vessel must keep sealed.
Pack Size: 20L. If other packing specifications are needed, please consult with our Kylin Company.
Health and Safety: Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information. Read carefully and conform to precautions on MSDS and packing vessels. To avoid eye and skin contact, such tools as gloves, goggles and face mask etc should be used for works (proper safety measures should be taken according to construction methods and circumstances). All works with the product must be carried out according to all relative national health, safety and environment standards and codes. This product is for professional use only.
Limitation of liability: All information is given for guidance only. Unmixed material (in closed containers) should be maintained in protected storage in accordance with information given in the STORAGE Section of this data sheet. Technical and application data herein is for purpose of establishing a general guideline of the coating application procedures. Test performance results were obtained in a controlled laboratory environment and Kylin makes no claim that the exhibited published test results, or any other results, accurately represent results found in all field environments. As application, environment and design factors can vary significantly, due care should be exercised in the selection, verification of performance and use of the coating
Disclaimer: The information in the product manual is based on our experiences from the tests and practices. For the application without our knowledge, we could only make sure that our products themselves are warranted. It is allowed to modify the data in this product manual according to our continuous development and experience accumulation without advance notice. |
